Robotic Arm Feeding Winding CCD Detection Resistance Welding Test Swing Plate Automatic Production Line

The robotic arm feeding winding CCD detection resistance welding test swing plate automatic production line adopts the automatic winding, welding and detection assembly line operation mode. The transport arm automatically clamps the skeleton and puts it into the winding machine for winding. After the winding is completed, the enameled wire is automatically welded to the plug-in using resistance welding; after welding, CCD flatness and resistance value detection are performed.

1. Double machine winding operation.

2. Terminal winding can be realized, and the terminal winding can be vertically and horizontally.

3. The winding is flat, and there is no crossover or accumulation of winding.

4. CCD automatic flatness detection (detection and judgment according to samples), qualified parts flow to the next process for manual re-inspection (manual re-inspection station is added for early production or special quality control), and unqualified parts are automatically placed in the defective product box.

5. The winding variety can be quickly changed, and the quick clamps of different products are interchangeable.

6. Wire head processing method: a. Pull off or cut with pneumatic scissors; b. The waste wire falls into the waste wire slot.

7. 7-inch LCD touch screen programming, providing human-computer interactive visual teaching system, achieving WYSIWYG programming effect.

8. CCD automatic flatness detection (detection and judgment according to samples), qualified parts flow to the next process for manual re-inspection (manual re-inspection station is added for early production or special quality control), and unqualified parts are automatically placed in the defective box.

9. The defective box is locked with a lock to prevent operators from taking defective products from the defective box for continued use.

10. The resistance welding control program has an electrode head welding count (set by the process), and sets a warning for grinding (or replacing) the electrode after a certain number of welding.

11. During the resistance welding process, there will be no explosion welding, leakage welding and other phenomena.

12. Automatic resistance value detection, qualified parts are unloaded and stored, and unqualified parts are placed in the defective box.

13. The spindle and X, Y, and Z three dimensions all use AC servo motors, and the running speed and positioning speed of each axis are fast and accurate.

14. The control area is equipped with start and emergency stop buttons, which is easy to operate and user-friendly.