The automatic winding machine includes electrical and mechanical systems. If the operator uses it improperly, it will bring personal danger to them. Therefore, training must be carried out before operation. During the production process, the operator must operate in accordance with formal methods. Before operation, you should carefully read the accompanying instructions, familiarize yourself with the operating methods, and abide by the operating procedures to prevent the automatic winding machine from being damaged by misoperation and causing industrial accidents.
The following are prohibited behaviors for operators:
1. When the automatic winding machine is running at high speed, it is strictly forbidden to touch the moving parts. The spindle speed of the automatic winding machine is generally several thousand revolutions per minute. The spindle running speed of some automatic winding machines can reach more than 10,000 revolutions per minute. High. Unprotected touch will lead to unpredictable consequences.
2. It is strictly forbidden for non-equipment maintenance engineers to disassemble any parts on the automatic winding machine. The looseness of mechanical parts will make the automatic winding machine work unstable, resulting in low product qualification rate, and in severe cases, electric shock or even fire.
3. The machine should be used strictly in accordance with the operating procedures of the automatic winding machine. When hanging wires and loading and unloading skeleton fixtures, the power should be turned off as much as possible.
4. When installing the fixture, tighten the screws and fix the ejector pin to prevent loosening; when installing the frame, make sure it fits in place. When hanging the wire, make sure the lead wire will not interfere with the subsequent winding action.